• If you would like to gain access to see the full OTI forum, please consider joining the OTI. Click the Register button in the top right corner or if you have previously registered, click the Log In button. If you have forgotten your password, follow the "Forgot Password" link on the Log In page.

Search results

  1. Automatic drive for Lindow curvilinear with overhead dive

    Automatic drive for Lindow curvilinear with overhead dive

    New motor installed at rear of lathe to drive headstock at approx 15 to 20 rpm for use with curvilinear.
  2. Automatic drive for Lindow curvilinear with adjustable  speed for headstock

    Automatic drive for Lindow curvilinear with adjustable speed for headstock

    12 x 21 jet lathe with head stock disconnected from motor. 90 rpm motor drives both the curvilinear and chuck. New motor at rear will allow separate adjustment of speed. Large lathe allows regular size tool post as well as all cutting frames. New shorter vertical pece required to rotate 2...
  3. Automatic drive for Lindow curvilinear with adjustable  speed for headstock

    Automatic drive for Lindow curvilinear with adjustable speed for headstock

    12 x 21 jet lathe with head stock disconnected from motor. 90 rpm motor drives both the curvilinear and chuck. New motor at rear will allow separate adjustment of speed. Large lathe allows regular size tool post as well as all cutting frames. New shorter vertical pece required to rotate 2...
  4. Automatic drive for Lindow curvilinear with adjustable  speed for headstock

    Automatic drive for Lindow curvilinear with adjustable speed for headstock

    12 x 21 jet lathe with head stock disconnected from motor. 90 rpm motor drives both the curvilinear and chuck. New motor at rear will allow separate adjustment of speed. Large lathe allows regular size tool post as well as all cutting frames. New shorter vertical pece required to rotate 2...
  5. Automatic drive for Lindow curvilinear with adjustable  speed for headstock

    Automatic drive for Lindow curvilinear with adjustable speed for headstock

    12 x 21 jet lathe with head stock disconnected from motor. 90 rpm motor drives both the curvilinear and chuck. New motor at rear will allow separate adjustment of speed. Large lathe allows regular size tool post as well as all cutting frames. New shorter vertical pece required to rotate 2...
  6. tool holder

    tool holder

    Small tool holder to fit on the Lindow curvilinear when using the small jet wood lathe .
  7. tool holder

    tool holder

    Small tool holder to fit on the Lindow curvilinear when using the small jet wood lathe .
  8. G

    Gorst DuPlessis

    We will all miss him. He was a great inspiration and a great teacher.
  9. Finial layered box with brass

    Finial layered box with brass

    Small layered finial box with brass lining and brass inset into lid.
  10. Finial layered box with brass

    Finial layered box with brass

    Small layered finial box with brass lining and brass inset into lid.
  11. Finial layered box with brass

    Finial layered box with brass

    Small layered finial box with brass lining and brass inset into lid.
  12. layered box

    layered box

    Box made of blackwood, osage orange and red heart. Finial made of blackwood
  13. blackwood box

    blackwood box

    Blackwood box with finial and threaded lid with engine turned aluminum insert on underside of lid
  14. blackwood box

    blackwood box

    Blackwood box with finial and threaded lid with engine turned aluminum insert on underside of lid
  15. tailstock

    tailstock

    Temporary tailstock from blackwood and steel used to hold the end of the finial after the initial cut and to eliminate chatter when making the top cut out sections of the finials. Removed after cutting toward the headstock. Oil hole in tailstock for walnut oil to lube end. Alignment must be...
  16. tailstock

    tailstock

    Temporary tailstock from blackwood and steel used to hold the end of the finial after the initial cut and to eliminate chatter when making the top cut out sections of the finials. Removed after cutting toward the headstock. Oil hole in tailstock for walnut oil to lube end. Alignment must be...
  17. Finials

    Finials

    Finials made on a Lindow RE from 4 1/2 to 10 1/2 inches long. Use of a temporary tailstock to eliminate chatter at the far end. Typical thickness on some of the finials is .075 for the end cut
  18. finial box

    finial box

    Final, threading and engine turning done on the rose engine. Homemade tailstock used to support the work after top cut is made on the finial. Blackwood and brass. 3 1/4 inches by 7 1/4 tall
  19. finial box

    finial box

    Final, threading and engine turning done on the rose engine. Homemade tailstock used to support the work after top cut is made on the finial. Blackwood and brass. 3 1/4 inches by 7 1/4 tall
  20. epicycloidal cutting frame/self tensiioning belt

    epicycloidal cutting frame/self tensiioning belt

    Epicycloidal cutting frame with new self tensioning system so as to be able to run the unit by hand or secondary power
Top