Fading


Overview


Fading Wedge
on an MDF Rose Engine Lathe

Fading is used to disengage the rosette during certain parts of the object's revolution.

As shown in the second picture to the left, the area in blue is where the rosette is outlining the pattern, and the area in red is where the fading wedge has disengaged the rosette. The amount of fading determines the amount of part which is red, vs. which is blue.


Plain 4 Rosette

Plain 4 Rosette with Fading

On the MDF rose engine lathe, this is implemented using a wedge. The fading wedge is shown in the picture on the right. It is the part with the scale markings on yellow tape (inside the red box).

To use it, the black, lower thumb screw is loosened and the wedge slid down between the headstock and the body. The amount it is lowered determines the amount of fading. Once in place, the thumb screw is then tightened to keep the setting in place.

There are other approaches, including use of a retractor, where the fading is increased or decreased by a linkage to the spindle drive. This could be used in conjunction with movement of the cutting frame (i.e., by use of a leadscrew) to create some really amazing art.

Additional pictures of this device

Examples of work produced with this device

Examples of this device in use

Usage Notes

How it works

The picture to the right shows what part of the machine determines the cutting of the shape of the object. It is an end view of the object, showing the parts of the rotational cycle where there is an exchange on which part drives the shape.

  • When the Fading Wedge is engaged more, the

red slices of the "pie" are more prominent in the cut pattern.

  • Conversely, when the Fading Wedge is engaged less, the

blue slices of the "pie" become more prominent in the cut pattern (showing the effects of the rosette more).

Notes on making one

More Information

Published Articles

Books and Papers

Web Sites

Presentations

Other

########## Standard Footer for all pages ##########

About this Site

Disclaimer: eMail comments to me at OTBookOfKnowledge @ Gmail.com. The process of woodturning involves the use of tools, machinery and materials which could cause injury or be a health hazard unless proper precautions are taken, including the wearing of appropriate protective equipment.